The Deluxe Walk-In Tack Security Safe Hexagon Shape model provides an extremely secure tack solution with the very special locking mechanism that is virtually impregnable.The locker has been developed for 10 years and allows eliminated access to similar storage units.
The door is mounted on two heavy duty hinges with a unique anti-theft system, the unit cannot be accessed by removing the hinges. Semi panelled in a 12/18mm exterior hardwood ply, suitably finished with high sheen varnish.
Allows for a maximum of 12 saddle racks & 12 bridle hoops to be fitted. Comes complete with tether ring welded to the unit. The base is made using a “tear drop” pattern mild steel plate that is non-slip. It has four holes drilled to allow further security if required and supported on four pallet feet.
There is also a unique vandal proof lock that cannot be removed and preventing entry into the unit. The key is fully registered to the owner of the unit and cannot be copied except by the manufacturer. The unit is fully welded along all seams on the outside only, using 2.5mm Prime Mild Steel for the shell and 3.0mm “Tear Drop” non-slip pattern for the floor. Four removable lifting lugs allow the unit to be lifted into place and the lugs can be retained for lifting if necessary at a later stage.
The unit is fully painted inside and out with one coat of primer and painted externally with one coat of “Hammer Finish” paint in a choice of four colours. Please use the drop-down menu above to choose the colour of your unit.
|Weight fitted approx.||500kg|
The Walk-In Tack Security Safe range
The need for a robust, high security walk in unit has become increasingly necessary with thefts of tack equipment, estimated to be in excess of £3 million in 2012. Most of these thefts have taken place from already secure yards, however, access through doors, windows and ceilings allow the thief to enter the property easily, load quickly and exit within minutes with up to £30,000 of tack equipment.
Providing a proper solution our locking mechanism that is virtually impregnable has been developed for 10 years and allow eliminated access to similar storage units.
The unit dimensions vary depending on the model. The user can enter the unit through a full length door and gives easy access to storing saddles, bridles, reins, other riding equipment and a shelf if required to store ancillary items.
The floor is pre-drilled with four holes, allowing for further security if necessary, by bolting to the floor.
The unit is fully ventilated and protected by a welded cowling, access to the unit is only allowed by a unique, tamper proof locking system. The key is registered by the manufacturer and cannot be copied without their permission. There is a secondary locking system that allows the unit to be entered if required using a simple snap lock.
The unit can be lifted into place using the detachable lugs or by using pallet tines or forks, alternatively we can deliver using our own hiab transport and place it safely in the required location subject to access.