With its small wheels and removable trug this handy bin is ideal for log carting, shopping etc. Remove the trug and it can be used for many awkward tasks.

Large pneumatic wheels make this trailer easy to manoeuvre over rough ground: the removable 39 litre bin with two rope handles makes this unit an ideal transporter for numerous outdoor tasks.

Our tow assembly is designed to pull loads of up to 1500kg. It attaches to a standard three point linkage as shown in the product photograph. This product is of the original British design and fabricated in the UK. Will suit most cat 1 tractors. A cat 2 version can be supplied on request. Please contact us for details and expert advice before purchase. Comes complete with a ball and jaw hitch, as shown in the product photograph, enabling you to move both ball fitting and ring hitch trailers. A heavy duty tow assembly is also available for loads of up to 3500kg. This product should be considered when towing loads over uneven terrain or up hill as the additional load may strain the standard assembly.

Details Supplied complete with lid and rigid plastic liner. Available in a wide choice of colours. Large capacity. Additional Information Product Code ST716 External Dimensions (L x W x H) 375 x 375 x 870mM Internal Base Dimensions n/a/td> Material Food Grade Medium Density Polyethylene Recommended Weight Limit No Volume Capacity 45 litres Wheel/Castor Type No

For more information please call us.

Details Supplied complete with lid and rigid plastic liner. Available in a wide choice of colours. Large capacity. Additional Information Product Code ST717 External Dimensions 510 x 960mm Internal Base Dimensions n/a Material Food Grade Medium Density Polyethylene Recommended Weight Limit No Volume Capacity 118 Litres Wheel/Castor Type No

This four wheeled sprinkling unit is perfect for areas where you do not want to stand a heavy bowser, or where access would be difficult. Can be used with any high flow water pump. Up to 5.5 bar pressure Approx 35 meter diameter spread. This spinkler would be ideal for maneges to reduce dust. It is also designed for sports turf such as cricket squares, bowling greens and so forth, where it is essential to keep pressure on the turf to a minimum. It could also be used in gardens particularly where it may be difficult to manoeuvre a bowser up close to the area that needs water.

The rubber drag mat, constructed from moulded rubber with a galvanised towing bar is ideal for use on most surfaces - natural or artificial. The rubber matting lessens surface damage that may be caused by heavier metal units. Other widths available on request. Heavy Duty 20mm thick rubber mat. Specification Working width: 1500mm (60") Weight: 30kg Demo Video

The heavy duty tow assembly is manufactured to tow loads up to 3500KG. Will pull loads up to 5000kg with a NATO hitch (sold separately) This tow assembly attaches to a standard three point linkage as shown in the product photograph. This product is of the original British design and fabricated in the UK. Comes complete with a ball and jaw hitch, as shown in the product photograph, enabling you to move both ball fitting and ring hitch trailers. The heavy duty tow assembly should be considered when pulling loads over uneven terrain or up hill as the extra work will strain a standard tow assembly.

The Pack 'n Ride Utility box is a versatile storage solution for your quad. It is easily attached to the rear rack using the quick attach straps provided. The central compartment can be removed and used as a separate storage box on the front ATV rack. When the central compartment is removed it leaves a padded seat which provides a comfortable and secure seat for relaxing. The larger rear section of the box opens up to provide a U-shaped storage area. This rear storage section is lockable and can be secured with a padlock (not supplied). Features Quick attach system. Universal fit on any ATV rear rack. Rear mounted reflector. Locking lid keeps your gear safe. Made from high-impact resistant UV stabilized polymer. Moulded in carry handles. Comfortable seat for relaxing. Dimensions: 960 x 615 x 395 mm. We offer the best value Quad ATV Attachments to meet all your needs: Quad ATV Equipment and Boxes, Quad ATV Spreaders, Quad ATV Mowers, Quad ATV Sprayers,...

This subsoiler breaks up soil at depths of up to 18 inches with its single tine. Made from high quality British steel, this product is strong and reliable. Fits to your tractors three point linkage system, either category one or two. For deeper soil penetration, used to break up and loosen soil for better crop growth. A double tine version of this product is also available, please use drop down menu to select your option.

Comes with Sidebar The Scarifying Rake is designed to remove dead and matted grass from pasture land, paddocks and rough grassed areas. The rake may also be used for combing through most horse manges, freshening up large drives and gravelled areas, etc. With the transport wheels removed and turning the rake upside down it becomes a useful tool for levelling seed beds, mole hills, etc. The rake is transported in the upside down position on the two wide profile wheels supplied with each rake. New for Gravel Drive Maintenance The tow bar on the Rake has been redesigned so that the rake will tow in an angled position. A side blade is fitted to pull gravel in from the side which has been pushed to the edge. Number of tines: 2 rows of 10 tines (staggered) Working width: 1530mm (60") Overall width: 1750mm (70") The item itself can be angled by approx. 25 degres, this will enable the machine to help drag in stones,gravel, sand etc from the outside to the centre...

Scarifying Rake with Sidebar- SCH SR2 The scarifying rake is designed to remove dead and matted grass from pasture land, paddocks and rough grassed areas. The rake may also be used for combing through most horse manéges, freshening up large drives and gravelled areas, etc. With the transport wheels removed and turning the rake upside down it becomes a useful tool for levelling seed beds, mole hills, etc. The rake is transported in the upside down position on the two wide profile wheels supplied with each rake. New for Gravel Drive Maintenance The tow bar on the SR2 has been redesigned so that the rake will tow in an angled position. A side blade is fitted to pull gravel in from the side which has been pushed to the edge. Specification Number of tines 2 rows of 10 tines (staggered) Working width 1530mm (60") Weight 30kg Overall width 1750mm (70") Demo Video

This is a chemical applicator which can be fitted to the De-compaction Rake to apply required chemicals to long fiber synthetic sports surfaces of which 3g is the most common at this time. The chemical is applied by a dribble/drip bar mounted in front of the row of scarifying tines. The object is to apply the chemical and then the tines will open up the surface to allow it to reach the required areas. Flow rates can be adjusted to suit the required application rate. Power to the pump is supplied from the towing unit. Specification Tank capacity: 70 litres Weight: 60kg Please note first image shows unit fitted to SCHDCR.

Track Ripper The Track Ripper features a row of removable heavy duty spikes which are used to rip into the ground to break up surface compaction. Features include The ripper bar can then be removed and the levelling lute will level the surface The TR is ideal to level tracks and fill in potholes If the surface is not broken up prior to filling in potholes, the holes will soon reappear, often larger than before they were repaired Additional top weight can be added if required to help with the penetration depth The heavy duty spikes can be easily replaced when worn Especially useful on farm tracks, woodland walks and carparks The Track Ripper is connected via a 3 point linkage Specifications Overall width: 1625mm (64") Working width: 1525mm (60")

Standard Tractor Subsoiler.

The Mule Yard Scraper is the ideal solution to yard and outhouse upkeep saving elbow grease if you currently use a manual scraper, and saving time and hassle compared to a tractor scraper. This scraper is fitted with heavy duty rubber to prevent damage to surfaces. Optional rubber sides are available for extra protection. The high tensile steel frame is designed for long life. The yard scraper is 1.5m wide. The Mule Yard Scraper requires a UTV supermount system to attach it to. We currently offer supermounts to suit the Mule 4010 and Mule 610. The Supermount System gives you great ground clearance with the ability to angle the yard scraper left/right in 5 positions and to lift the blade up to the height of the bumper. No drilling is required to fit our supermount system. Once in place, the supermount system is also compatible with other attachments, such as snow plough and sweeper. The UTV yard scraper also requires an electric lift system which gives easy, quick and smooth...

This rake has four rows of heavy duty spring coiled tines which will tease out the thatch and dead grass from paddocks and large grass areas. A weight tray on top of the unit allows ballast weight to be added to give extra penetration. Depth control wheels which also act as transport wheels are fitted as standard. Working width 1530mm (60") Weight 46kg

Scarifying Rake SCH SR4 This rake has four rows of heavy duty spring coiled tines which will tease out the thatch and dead grass from paddocks and large grass areas A weight tray on top of the unit allows ballast weight to be added to give extra penetration Depth control wheels which also act as transport wheels are fitted as standard Specification Working width: 1530mm (60") Weight: 46kg

Yard Scraper - Option A with Manual Lift System Our scraper is the ideal solution to yard and outhouse upkeep saving elbow grease if you currently use a manual scraper, and saving time and hassle compared to a tractor scraper. This scraper is fitted with heavy duty rubber to prevent damage to surfaces. Optional rubber sides are available for extra protection. The high tensile steel frame is designed for long life. The yard scraper is 1.1m wide and is ideal for getting into narrow areas. It requires a front mount system to attach it to. We offer a choice of 2 front mount systems: Basic Angled and Supermount System. The basic angled mount with scraper would allow you to angle the scraper to the left/right. The basic mount systems along with the yard scraper are ideal if you have a tight budget. The scraper if used with the Supermount System will give you a much greater ground clearance with the ability to angle the scraper left/right in 5 positions and to lift the scraper...

Dozer / Silage Blade - Basic Mount with Manual Lift System Dozer Blade: This handy blade can be used as a dozer blade to help level out soil or for other tasks around the yard or garden. Silage Blade: This versatile attachment is useful for feeding housed livestock which avoids the need for grapping silage. Spring loaded and easily angled it is equipped with a 2-sided rubber blade to protect the floor from damage. Blade width: 4ft Please select your preferred Lift System Option A: Blade Basic angled front mount Option B: Blade Supermount System with Adjustable Angle Feature and Quick release. Video demonstration  

The Standard All Rubber Scraper comes with very sturdy rubber head for the best scraping result. Features include Available in painted and galvanised finish A set working width of 2.1m 25mm thick x 375mm rubber high flexible fibre reinforced hard wearing rubber Heavy duty structural box frame with computer aided design for increased drag efficiency giving better ground pressure for a cleaner sweep Optional linkage settings to suit most tractors up to 75hp with Category 1 and 2 lift pin options Speedy clean sweep at 6-8 MPH Optional settings for 3PL to suit most tractors Specification Operating Width 2.1m Weight 126kgs Rubber Blade Thickness 25mm Rubber Blade Height 400mm  

Silage Pusher The rotating wheel design allows silage to be moved within reach of the livestock, clearing the passageway. The wheel runs along the ground, rotating as the quad moves forward to collect the loose silage. Can be used on either side of passageways with adjustable left/right positions and adjustable wheel angle settings to ensure the wheel touches the ground the left/right positions are set using a simple lift and adjust mechanism Tyre can be supplied but will incur extra costs. Comes with supermount system. Delivery time on this item is estimated at 3 weeks. Video demonstration

The Galvanized All Rubber Scraper comes with very sturdy rubber head for the best scraping result. Features include Available in painted and galvanised finish A set working width of 2.1m 25mm thick x 375mm rubber high flexible fibre reinforced hard wearing rubber Heavy duty structural box frame with computer aided design for increased drag efficiency giving better ground pressure for a cleaner sweep Optional linkage settings to suit most tractors up to 75hp with Category 1 and 2 lift pin options Speedy clean sweep at 6-8 MPH Optional settings for 3PL to suit most tractors Specification Operating Width 2.1m Weight 126kgs Rubber Blade Thickness 25mm Rubber Blade Height 400mm  

  The Land Rake is a useful addition to any compact tractor fitted with a standard cat one 3-point linkage. Fitting and removing takes minutes and turns your tractor into a superb landscaping tool. 10mm heat treated spring tines set at 6 tines per 300mm will produce the finest tilth ready for planting. Useful for aerating and weeding the tines can also be angled or reversed for leveling and spreading of soil, compost, bark chippings etc. Also a great tool for renovating and leveling gravel paths, removing cut grass docs etc from horse paddocks. This really is a multiple use tool it has even been extended to remove weeds from a pond and even seaweed from the beach. Some self assembly required.

Scarifying Rake (3 Point Linkage) The Scarifying Rake has four rows of heavy duty spring coiled tines, each row having eleven twin tines. Features include The tines are staggered to give excellent coverage over the ground The tines being spring mounted "jigger" over the ground, pulling and teasing out the dead thatch and matt Our rake is mounted on a three point linkage with standard category 1 link size Other linkage categories can be supplied Available in 3 sizes Working width 60" (1530mm) Weight 75kg Working width 72" (1800mm) Weight N/A Working width 96" (2440mm) Weight N/A Demo Video

The three point linkage mounted rake is designed for grooming of areas of sand filled playing surfaces. Two rows of staggered spring tines tease through the playing surface to remove compaction and aid drainage. A tray is incorporated so that weight may be added to aid penetration on heavily compacted surfaces. The trailing brush then levels and grooms the play area, leaving it ready for many hours of hard use. The rows of tines are removable individually, meaning that you can adapt the unit to suit your requirements - eg. both rows of tines could be removed so that the brush is only in operation. The unit has 1800mm (71") working width, but other widths are available on request. Just call or email.

The Three Point Linkage Mounted Rake is designed for grooming of areas of sand filled playing surfaces. Two rows of staggered spring tines tease through the playing surface to remove compaction and aid drainage. A tray is incorporated so that weight may be added to aid penetration on heavily compacted surfaces.ï¾ The trailing brush then levels and grooms the play area, leaving it ready for many hours of hard use. The rows of tines are removable individually, meaning that you can adapt the unit to suit your requirements - eg., both rows of tines could be removed so that the brush only is in operation. The unit has a 1800mm (71") working width, but other widths are available on request. Just call or email. Please note the third image shows the rake with our rubber drag mat (Ref: RDM) being towed behind the unit. The mat will give a final levelling to the top sand and work it into the surface to leave a perfect finish for playing. Specification Engine: 5.5HP...

Rubber Scraper - Painted The latest addition. The main features of the Flexi scraper include fully adjustable scraping wings that allow the operator to adjust working width from 6ft to 7ft in 3 settings, giving flexibility for use in more confined areas. The scraper is constructed using a heavy duty structural box frame design and is supported with a specially moulded 50mm hard wearing rubber blade which will tackle even the toughest of scraping jobs with ease. The flexi scraper is fully reversible using a simple latch mechanism from the tractor seat.

The heavy duty Single Leg Mole Drainer offers easy penetration and can be used on all kinds of tractors. 16hp. Optional extras Disc and Fittings Wing Kit